CiscoTik

Networking Administration

CiscoTik

Networking Administration

CiscoTik

آموزش شبکه های مبتنی بر سیسکو و میکروتیک و ...

طبقه بندی موضوعی
محبوب ترین مطالب
نویسندگان

۱ مطلب با کلمه‌ی کلیدی «weight» ثبت شده است

  • ۲
  • ۰

BGP community

سلام

شرح سناریو

..........................................................................

R1 is configured for EBGP and IBGP. The EBGP connection to the remote peer address, 141.199.2.2, is the Internet gateway. Therefore, you must send the
community to the remote peer and apply an outbound route map, so the Internetrouters do not use R1 as a transit path. You have yet to apply the route map named setcommunity (arbitrary name).  Apply the well-known community no-export, which informs the neighboring router not to use R1 for any traffic not destined for the network 131.108.0.0/16.

configure the four routers, R1–R4, for IBGP, and set the same policies on all four routers.



comunity






ensure that R1 does not receive any default routes from R2, R3, or R4 (sets the next-hop-self attribut. Ensure that R1 sets the community to the value 2000.


R1(config)#route-map setcommunity
R1(config-route-map)#set community no-export
R1(config-router)#neighbor 141.199.2.2 route-map setcommunity out
یعنی مسیرهایی که با این مقدار دریافت میشوند،دیگر به همسایه های eBGP تبلیغ نشوند.یعنی به روتر 5 هیچ مسیری از AS1 تبلیغ نشود.